Differences

This shows you the differences between two versions of the page.

--- boiler.metallurgy.tube_bend_thickness [2020/04/06 15:36] – created fornax
+++ boiler.metallurgy.tube_bend_thickness [2020/04/06 19:25] (current) – removed fornax
@@ Line 1: / Line 1: @@
-====== Wall thickness reduction during tube bending process ======
-Units for variables below are irrelevant as long as they are consistent.
-tex = t * 2 * R / (2 * R + d)
-tex   -   thickness of extrados
-t     -   original tube thickness
-d     -   tube diameter
-R     -   centerline bending radius